Wall-On Glass

Key Features of Fusion Glass Walk-On Glass Floors

At Fusion Glass Ltd, we supply high-quality walk-on glass panels designed for strength, durability, and modern aesthetics. Our glass floors are available with or without a thermal layer, ensuring that every project meets the required insulation and safety standards. Below are the key features that make our walk-on glass floors the perfect choice for residential and commercial applications.

Strength & Durability

Our walk-on glass floors are made using triple heat-soak toughened laminated glass, providing exceptional impact resistance and a high load-bearing capacity. This ensures they can handle heavy foot traffic while maintaining a sleek and modern look.

Load & Weather Testing

Each glass floor system undergoes rigorous load and weather testing, meeting the PAS24 – 2016 and BS6375-1 standards. This guarantees long-term performance and protection, ensuring that the glass withstands daily use and environmental factors.

High-Quality Aluminium Frame

All our walk-on glass panels come with a marine-quality, polyester powder-coated aluminium frame in RAL9005 black, providing a sleek, modern aesthetic while offering maximum protection against corrosion and weather exposure.

Customisation & Finish Options

At Fusion Glass Ltd, we provide a variety of custom finishes to meet your design needs:

- Clear glass for a sleek, open look.

- Opaque glass for added privacy.

- Anti-slip glass for safety in high-traffic areas.

Thermal Efficiency & Insulation

For projects that require additional insulation, our thermal walk-on glass features a double-glazed panel with an argon-filled cavity, reducing heat loss while maintaining maximum strength and security. This makes it an ideal solution for external applications or rooms requiring additional insulation.

This guide provides step-by-step instructions for installing standard walk-on glass and thermal walk-on glass, ensuring a secure and professional finish

Before installation, ensure the structural opening is prepared to the correct size:

- The external frame size should match the ordered glass dimensions.

- The supporting structure must be made of strong structural timber or steel to handle the glass load.

- A minimum upstand of 150mm is recommended to prevent water ingress for external applications.

For thermal walk-on glass, an insulated kerb/upstand is required to maintain thermal efficiency.

1. Apply Structural Support

      • Ensure the supporting frame is level and structurally secure.

      • A minimum bearing width of 75mm is recommended for supporting the glass edges.

2. Apply a Silicone Bead

      • A thick silicone bead should be applied around the perimeter of the support frame to create a seal and prevent movement.

3. Positioning the Glass

      • Carefully lower the walk-on glass panel into place, ensuring a 10mm gap is maintained between the glass and any stop bead.

      • The glass should sit evenly on all sides, ensuring it rests securely on the structural frame.

4. Sealing & Finishing

      • Once in place, structurally bonded adhesive should be used to secure the glass to the frame.

      • The surrounding area can be finished with plasterboard and flooring materials to match the rest of the space.

The thermal version of walk-on glass includes a double-glazed panel with an argon-filled cavity, providing insulation while maintaining strength.

1. Preparing the Insulated Upstand

      • Install an insulated kerb to prevent thermal bridging.

      • The kerb should be weatherproofed with an EPDM or similar membrane to protect against moisture ingress.

2. Applying Weatherproof Sealant

      • Before fitting the glass, apply a continuous layer of silicone bead to the upstand.

      • Ensure all edges are evenly sealed for maximum insulation and security.

3. Positioning & Fixing the Glass

      • Carefully lower the glass into position, ensuring a secure and level fit.

      • Use packers where necessary to ensure the glass sits evenly.

      • Secure the glass with UV/weatherproof structural bonding adhesive for long-term durability.

4. Finishing Touches

      • A black decorative border on the glass ensures a clean, framed look.

      • The edges should be sealed with a weatherproof silicone layer to prevent air leakage.

Once installed, it is essential to:

- Ensure all seals are intact and no movement occurs.

- Inspect the perimeter regularly for any signs of air or water ingress.

- Clean the glass with non-abrasive products to maintain clarity and longevity.

By following this guide, your Fusion Glass Ltd Walk-On Glass Floor will be safely and securely installed, offering a stunning modern finish with strength and durability. For bespoke sizes or additional support, contact Fusion Glass Ltd today!